Close×

Car-O-Liner has released new versions of Vision2 software X1/X2/X3 and Vision2 PointX.

The pairing of Car-O-Tronic or Point X moves from Windows into the Vision2 software. This will give better support and easier handling the company says. Pairing a Car-O-Tronic or Point X with a 64-bit or 32-bit Bluetooth will now be very similar - no extra drivers need to be installed. 

When entering the measuring mode you will be asked to search for your Car-O-Tronic or Point X. When the search screen pops up, choose Car-O-Tronic or Point X and press OK. The pairing will take place and you will be able to use the device. A working connection is achieved when the arrows in the lower right corner turn green.

If your Car-O-Tronic or Point Xhas alreading been used with Vision2 before updating, this connection is remembered. Vision2 Diagnose can also be used to pair the Car-O-Tronic or Point X before the first use.

Also new is a warning that will pop up if no tubes are inserted into the Car-O-Tronic measuring slide.

More measuring points available

DataSheets can now contain an increased number of measruing points to give you more measuring possibilities. A DataSheet can have up to three pages of measuring points.

The two new releases are free of charge for existing Car-O-Tronic or Point X customers and are released through the update software function or as separate downloads from VisionWeb.

comments powered by Disqus