The Rail Saver a must-have

Every once and a while, along comes one of those “must-have” gadgets to have ready on the shelf when you need it. The Rail Saver is one such tool.

Easy to use, precise in its application, the Rail Saver can save hours compared with clumsy alternatives.

A custom-made four-ton hydraulic ram pushes on a sliding wedge bar which enables a prying or opening force to be applied inside the confines of a box section rail.

This can now be done more quickly, more precisely and to a greater depth than ever before.

Rails can be repaired from the inside without the need for access holes and with less hammering and damaging of the protective surface coatings.

Most rails are accessible and the operators own ingenuity can easily adapt the tool to handle the most complex rail shapes and protrusions.

With the Rail Saver, it’s more like caressing the metal back in to shape rather than belting the daylights out of it.

Whether you push out a small crease on a small job or save a rail on a bigger repair, the Rail Saver will enable a more professional repair with reduced cycle times.

Customer feedback has been 100 per cent positive.

For further information contact: robert@sape.com.au or phone (02) 9772 9000